22 Technical data (Clone)

22.1 Mechanical data

						Unit	Value
Table and Work Area
	Effective dimension of working bench (Length x Width)					mm	580 x 260
	T-Slot width					mm	14
	Number and distance between T-Slots					mm apart	3 x 80
	Maximum load capacity of the working bench					Kg	150
	X Axis Travel					mm	300
	Y Axis Travel					mm	260
	Z Axis Travel					mm	300
Motors and Spindle
	Main Spindle Taper						BT30
	Maximum Rotational Speed Main spindle					RPM	20,000 Standard
	Maximum Rotational Speed Main spindle					RPM	10,000 Optional
	Spindle Motor Power (Rated/Max)					kW	5.5/7.5
	Axis Motors	Torque/power of x-spindle				Nm/kW	6/1
		Torque/power of y-spindle				Nm/kW	8/1.7
		Torque/power of z-spindle				Nm/kW	11/2.4
	Max Rapid Speed (G0)					mm/min	35,000
	Maximum cutting speeds					mm/min	10,000
Bearings and Leadscrews
	Leadscrews (diameter/pitch)				XY	mm	25/12
	Leadscrews (diameter/pitch)				Z	mm	25/12
	Linear bearing rail dimensions				X	mm	20
					Y	mm	25
					Z	mm	30
Positioning and Repeatability
	Precision		Positioning Precision			mm	< 0.005
	Precision		Repeated Positioning Precision			mm	< 0.003
Tool Changer
	Type						Airless Drum
	Tool quantity						16
	Max tool length					mm	250
	Max tool diameter					mm	80
	Max tool weight					Kg	3
	Max offset loading capacity of magazine					Kg	12
	Max loading capacity of magazine					Kg	25
	Tool switching time					seconds	0.3
	Tool disk running method						SANJET servo motor
Overall Dimensions
	Machine weight			Net Weight		kg	2,000
	Machine weight
	Machine dimension (Length x Width x Height)			Footprint including coolant tank		mm	2,020 x 1,000 x 2,360
Coolant tank
	Coolant tank capacity					litres	80
Air pressure
	Min/max air pressure					MPa ( psi)	0.4/0.8 (60/120)
Shipping dimensions
	Gross weight					kg	2,200
	Transport packaging dimensions (LWH)					mm	2,160 x 1,250 x 2,300

					Unit		Value
TableandWork Area
Effective dimension of working bench (Length x Width)					mm		700x300
T-Slot width					mm		14
Number vb and distance betweenT-Slots					mmapart		3x100
Maximum load capacity of the working bench					Kg		100
X Axis Travel					mm		400
Y Axis Travel					mm		300
Z Axis Travel					mm		380
Max weight (evenly distributed)					Kg		250
Motors and Spindle
Main Spindle Taper							BT30orHSK-40E
Maximum Rotational Speed Main spindle					RPM		12,000 Max Standard
Maximum Rotational Speed Main spindle					RPM		30,000 Max with HSK spindle Optional
Spindle Motor Power(Rated/Max)					kW		Rated3.7/5Max(LNC) Rated 7.5/11Max(SYNTEC&Siemens)
Axis Motors	Torque/power of X-spindle				Nm/kW		4/1.5
	Torque/power of Y-spindle				Nm/kW		6/1.5
	Torque/power of Z-spindle				Nm/kW		6/1.5
Max Rapid Speed(G0)					mm/min		30,000
Maximum cutting speeds					mm/min		10,000
Bearings and Lead screws
Lead screws(diameter/pitch)			XY		mm		25/10
Lead screws(diameter/pitch)			Z		mm		25/10
Linear bearing rail dimensions			X		mm		20
			Y		mm		25
			Z		mm		25
Positioningand Repeatability
Precision	Positioning Precision				mm		< 0.005
Precision	Repeated Positioning Precision				mm		< 0.003
Tool Changer
Type							Arm
Tool quantity							16
Max tool length					mm		100
Max tool diameter Solid end mill					mm		16
Max tool diameter Index able face mills					mm		50
Max tool weight					Kg		2
Tool switching time					seconds		2
Type							Umbrella
Tool quantity							12
Max tool length					mm		100
Max tool diameter Solid end mill					mm		16
Max tool diameter Index able face mills					mm		50
Max tool weight					Kg		2
Toolswitching time					seconds		10
Overall Dimensions
Machine weight		Net Weight			kg		1,800
Machine weight
Machine dimension (LengthxWidthxHeight)		Footprint including coolant tank			mm		1,800x1,500x2,290
Coolant tank
Coolant tank capacity					Litres		80
Airpressure
Min/max air pressure					MPa(psi)		0.4/0.8(60/120)
Shipping dimensions
Gross weight				kg		2,200
Transport packaging dimensions (LWH)				mm		2,000 x 1,700 x 2,260

								Unit			Value
TableandWorkArea
	Effective dimension of working bench(LengthxWidth)							mm			860x500
	T-Slotwidth							mm			18
	Number and distance between T-Slots							mmapart			18x5x100
	Maximum load capacity of the working bench							Kg			500
	X Axis Travel							mm			760
	Y Axis Travel							mm			500
	Z Axis Travel							mm			500
Motors and Spindle
	Main Spindle Taper										BT40
	Maximum Rotational Speed Main spindle							RPM			10,000Standard
	Spindle Motor Power (Rated/Max)							kW			11/17
	Axis Motors		Torque/powerofx-spindle					Nm/kW			18/3.9
			Torque/powerofy-spindle					Nm/kW			18/3.9
			Torque/powerofz-spindle					Nm/kW			28/5.9
	Max Rapid Speed(G0)							mm/min			36,000
	Maximum cutting speeds							mm/min			10,000
Bearings and Lead screws
	Lead screws (diameter/pitch)					X		mm			36/16
	Lead screws (diameter/pitch)					YZ		mm			40/16
	Linear bearing rail dimensions					X		mm			35
						Y		mm			45
						Z		mm			45
Positioning and Repeatability
	Precision			PositioningPrecision				mm			<0.01
	Precision			RepeatedPositioningPrecision				mm			<0.01
Tool Changer
	Type										ARM
	Tool quantity										24
	Max tool length							mm			240
		Max tool diameter							mm		150
		Max tool weight							Kg		8
		Max loading capacity of magazine							Kg		380
		Tool switching time							seconds		1.6
Overall Dimensions
		Machine weight			Net Weight				kg		5500
		Machine weight
		Machine dimension (LengthxWidthxHeight)			Footprint including coolant tank				mm		1850x2245x2800
Coolant tank
		Coolant tank capacity							litres		200
Airpressure
		Min/max air pressure							MPa( psi)		0.4/0.8(60/120)
Shipping dimensions
Gross weight							kg			5,140
Transport packaging dimensions (LWH)							mm			2,500 x 2,100 x 2,500

X11

						Unit	Value
TableandWorkArea
	Effective dimension of working bench (LengthxWidth)					mm	1050x550
	T-Slot width					mm	18
	Number and distance betweenT-Slots					mmapart	18x5x90
	Maximum load capacity of the working bench					Kg	600
	X Axis Travel					mm	1000
	Y Axis Travel					mm	500
	Z Axis Travel					mm	500
MotorsandSpindle
	Main Spindle Taper						BT40
	Maximum Rotational Speed Main spindle					RPM	10,000Standard
	Spindle Motor Power(Rated/Max)					kW	11/17
	Axis Motors	Torque/power of x-spindle				Nm/kW	18/3.9
		Torque/power of y-spindle				Nm/kW	18/3.9
		Torque/power of z-spindle				Nm/kW	28/5.9
	Max Rapid Speed(G0)					mm/min	30,000
	Maximum cutting speeds					mm/min	10,000
Bearings and Leadscrews
	Lead screws(diameter/pitch)				X	mm	40/12
	Lead screws(diameter/pitch)				YZ	mm	40/12
	Linear bearing rail dimensions				X	mm	45
					Y	mm	45
					Z	mm	45
Positioning and Repeatability
	Precision		Positioning Precision			mm	<0.01
	Precision		Repeated Positioning Precision			mm	<0.01
Tool Changer
	Type						ARM
	Tool quantity						24
	Max tool length					mm	240
Max tool diameter						mm	150
Max tool weight						Kg	8
Max loading capacity of magazine						Kg	380
Tool switching time						seconds	1.6
Overall Dimensions
Machine weight				NetWeight		kg	6500
Machine weight
Machine dimension (LengthxWidthxHeight)				Foot printincluding coolant tank		mm	2600x2150x2500
Coolant tank
Coolant tank capacity						litres	280
Airpressure
Min/maxairpressure						MPa( psi)	0.4/0.8(60/120)
Shipping dimensions
Gross weight						kg	5,140
Transport packaging dimensions (LWH)						mm	2720 x 2200 x 2550

		Unit	Value
Table
	Table size (mm)	mm	700×420
	T-Slots (number×size×distance) mm	mm	3×14.3×125
	Max. table load (kg)	kg	250
Travel
	X Travel (mm)	mm	600
	Y Travel (mm)	mm	450
	Z Travel (mm)	mm	330
	Distance between spindle end and tabletop (mm)	mm	150-480
	Distance between spindle and column surface (mm)	mm	320
Spindle
	Spindle nose		BT30
	Spindle speeds (rpm)		20,000
	Mechanism of transmission		Direct
Feed
	Rapid traverse (mm/min)		48,000
	Cutting feed (mm/min)		20,000
Auto Tool Changer
	Tool type		Wheel
	Tool storage capacity (positions)		21
	Max. tool diameter (mm)		63
	Max. tool length (mm)		250
	Max. tool weight (kg)		3
	Tool to Tool (s)		1
Machine Size and Weight
	Machine dimensionsL x W x H (mm)		2098×1550×2068
	Weight (kg)		4500
Shipping dimensions
	Gross weight	kg	3,890
	Transport packaging dimensions (LWH)	mm	2,500 x 2,000 x 2,300

		Unit	Value
Table
	Table size (mm)	mm	800×420
	T-Slots (number×size×distance) mm	mm	3×14.3×125
	Max. table load (kg)	kg	250
Travel
	X Travel (mm)	mm	700
	Y Travel (mm)	mm	450
	Z Travel (mm)	mm	330
	Distance between spindle end and tabletop (mm)	mm	150-480
	Distance between spindle and column surface (mm)	mm	320
Spindle
	Spindle nose		BT30
	Spindle speeds (rpm)		20,000
	Mechanism of transmission		Direct
Feed
	Rapid traverse (mm/min)		48,000
	Cutting feed (mm/min)		20,000
Auto Tool Changer
	Tool type		Wheel
	Tool storage capacity (positions)		21
	Max. tool diameter (mm)		63
	Max. tool length (mm)		250
	Max. tool weight (kg)		3
	Tool to Tool (s)		1
Machine Size and Weight
	Machine dimensionsL x W x H (mm)		2098×1850×2068
	Weight (kg)		4500
Shipping dimensions
	Gross weight	kg	3,890
	Transport packaging dimensions (LWH)	mm	2,500 x 2,000 x 2,300

22.2 Electrical data

PowerInput	3Phasemachines Machinesbydefaultrequire 380-440V3Phase,(30A)22kVAat50/60Hz Configuration: 3P-PE.
PermissibleVoltageFluctuation	-6%to+10%(380-440VPhasetoPhase) Phaseimbalancenottoexceed3%betweenatleast2ofthephases(1-2,1- 3,2-3) Phaseconverters: CAUTION!Phasetophasevoltagemustnotexceed440V.Thiswillcause an overvoltagewithsome components.
Recommendedpowercable

PowerInput

3Phasemachines

Machinesbydefaultrequire 380-440V3Phase,(30A)22kVAat50/60Hz Configuration: 3P-PE.

PermissibleVoltageFluctuation

-6%to+10%(380-440VPhasetoPhase)

Phaseimbalancenottoexceed3%betweenatleast2ofthephases(1-2,1- 3,2-3)

Phaseconverters:

CAUTION!Phasetophasevoltagemustnotexceed440V.Thiswillcause an

overvoltagewithsome components.

Recommendedpowercable

	3Phase	LNCSinglePhase
Power Input	Machinesbydefaultrequire380-440V3Phase, (32 A) at 50/60 Hz Configuration:3P-PE(4prongplug). NOTE:DoNOTuse3P-N-PEunlessNisidentified and not connected	Machine built to order as single phaserequire240V50/60Hz24-amp Min.
Permissible Voltage Fluctuation	15% to +10% (380-460V Phase to Phase)Phaseimbalancenottoexceed3%betweenat least 2 of the phases (1-2,1-3,2-3) NOTE: Rotary phase converters are acceptable despite the inherent imbalance of the phases. Phasetophasevoltagemustnotexceed440Vor willcauseanovervoltagewithsomecomponents.	15%to+10%

3Phase

LNCSinglePhase

Power Input

Machinesbydefaultrequire380-440V3Phase, (32 A) at 50/60 Hz

Configuration:3P-PE(4prongplug).

NOTE:DoNOTuse3P-N-PEunlessNisidentified and not connected

Machine built to order as single phaserequire240V50/60Hz24-amp Min.

Permissible Voltage Fluctuation

15% to +10% (380-460V Phase to Phase)Phaseimbalancenottoexceed3%betweenat least 2 of the phases

(1-2,1-3,2-3)

NOTE: Rotary phase converters are acceptable despite the inherent imbalance of the phases. Phasetophasevoltagemustnotexceed440Vor

willcauseanovervoltagewithsomecomponents.

15%to+10%

Controller	X5	X7	X9	X11
Siemens SINUMERIK 828D 10”
Spindle motor output (Rate/Max) kW:	4.8	7.5	10	10
Drive motors (X, Y, Z) kW:	1/2.2/3.5	1.1/2.2/2.2	3/3/3.5	3/3/3.5
Power source:	AC380V/3-phase	AC380V/ 3-Phase	AC380V/ 3-Phase	AC380V/ 3-Phase
Power (kVA):	12	14	17	20
SYNTEC 22MA
Spindle motor output (Rate/Max) kW:	5.5/7.5	8.2/12	11/17	11/17
Drive motors (X, Y, Z) kW:	1/1.7/2.4	1.1/1.7/2.4	3.9/3.9/5.9	3.9/3.9/5.9
Power Source:	AC380V/ 3-Phase	AC380V/ 3-Phase	AC380V/ 3-Phase	AC380V/ 3-Phase
Power (kVA):	12	14	25	25
FANUC 0iMF Plus
Spindle motor output (Rate/Max) kW:	3.7/5.5	3.7/5.5	7.5	7.5
Drive motors (X, Y, Z) kW:	1/2.5/2.7	2.2/2.2/2.7	3/3/3	3/3/3
Power source:	AC220V/3-phase	AC220V/3-phase	AC220V/3-phase	AC220V/3-phase
Power (kVA):	12	12	18	18
LNC M6800
Spindle motor output (Rate/Max) kW:	3.7/5.5	2.2/3.0
Drive motors (X, Y, Z) kW:	0.85/1.3/1.3	0.85/1.3/1.3
Power Source:	AC380V/ 3-Phase	AC220V/ 1-Phase
Power (kVA):	10	7

Controller	T5	T7
Siemens SINUMERIK 828D 10”
Spindle motor output (Rate/Max) kW:	4.8	4.8
Drive motors (X, Y, Z) kW:	2.2/2.2/2.2	2.2/2.2/2.2
Power source:	AC380V/ 3-Phase	AC380V/ 3-Phase
Power (kVA):	12	12
SYNTEC 22MA
Spindle motor output (Rate/Max) kW:	5.5/7.5	5.5/7.5
Drive motors (X, Y, Z) kW:	1.7/1.7/2.4	1.7/1.7/2.4
Power Source:	AC380V/ 3-Phase	AC380V/ 3-Phase
Power (kVA):	14	14
FANUC 0iMF Plus
Spindle motor output (Rate/Max) kW:	3.7/5.5	3.7/5.5
Drive motors (X, Y, Z) kW:	2.2/2.2/2.7	2.2/2.2/2.7
Power source:	AC220V/3-phase	AC220V/3-phase
Power (kVA):	12	12

22.3 Noise emissions

Tests have been conducted on representative machines within the SYIL range of machine tools according to ISO 8525:2008.
• The A-weighted emission sound pressure level at workstations does not exceed 70 dB ref. 20 mPa
• The peak C-weighted instantaneous sound pressure value at workstations does not ex-ceed 130 dB ref. 20 mPa
NOTE: During cutting the noise level of the machining may exceed 85 dB (A) as well as due to the environment.

22.4 Standard Accessories

	X5	X7	X9	X11	T5	T7
Modern CNC control systems	●	●	●	●	●	●
Absolute Servos	●	●	●	●	●	●
Rigid tapping	●	●	●	●	●	●
High flow coolant pump and tank	●	●	●	●	●	●
Coolant wash down hose	●	●	●	●	●	●
Airgun outlet	●	●	●	●	●	●
LED Traffic light beacon/signal tower	●	●	●	●	●	●
Networking capabilities/USB data transfer	●	●	●	●	●	●
Remote MPG for all axes	●	●	●	●	●	●
Steel axis covers	●	●	●	●	●	●
20,000RPM spindle BT30	●	○	○	○	●	●
12,000RPMspindle BT30	○	●	○	○	○	○
10,000RPM spindle BT40	○	○	●	●	○	○
12 station automatic tool changer (umbrella)	○	●	○	○	○	○
16 station automatic tool changer	●	○	○	○	○	○
21 station automatic tool changer	○	○	○	○	●	●
24 station automatic tool changer (arm)	○	○	●	●	○	○

22.5 Optional Equipment

	X5	X7	X9	X11	T5	T7
NC rotary table Servo \| 4th axis 125 mm	●	●	○	○	○	○
NC rotary table Servo \| 4th axis 255 mm	○	○	●	●	○	○
NC rotary table \| 4th axis 170mm	○	○	○	○	●	●
Tail Stock for 125 mm NC rotary table	●	●	○	○	○	○
Tail Stock for 255 mm NC rotary table	○	○	●	●	○	○
Tailstocks for gear type 4 axis	○	○	○	○	●	●
Probe System \| Wireless type	●	●	●	●	●	●
Tool Setter Kits \| Cable type TTC200	●	●	●	●	●	●
ATC 16 positions BT30	○	●	○	○	○	○
Filtermist	○	●	●	●	○	○
5^thaxis	○	●	●	●	○	○
Chipconveyor	○	●	●	●	○	○
30,000RPMspindle(HSK-40E)	○	●	○	○	○	○
Spindle HSK – A63	○	○	○	●	○	○
Coolant Through Spindle (CTS 20 Bar)	○	●	●	●	○	○
Tooling Package	●	●	●	●	●	●