Skip to content
  • There are no suggestions because the search field is empty.

31 Storage

31.1 Packed Machine

  • Fasten all the loose parts and have an anti-rust treatment of the machine
  • Fix the machine firmly inside the crate to prevent the machine move from falling
  • Ensure to enclose the machine with a waterproof cover to keep this machine from moisture or corrosive substance. It prevents the mechanical and electrical parts from damage
  • Add an anti-moisture substance inside the crate
  • Do not place the whole packing directly under the sunlight or near any other heat source
  • Keep away from any corrosive substance or any equipment causing abnormal vibration
  • The ambient temperature and moisture should be moderate and kept as constant and smooth as possible

31.2 Bare Machine

  • Fasten all the loose parts
  • Apply liberal amounts of anti-corrosion media on the exposed metal parts
  • Lower the spindle to the bottom limit and rest it on a suitable block of wood
  • Disconnect and remove the power cable
  • Fasten all the sliding guards and doors to prevent them from moving
  • Add an anti-moisture substance inside the electric cabinet, operating panel, and any other enclosure of this machine
  • Cover the machine with a suitable waterproof and dust proof sheet or Moisture and dust may cause mechanical and electrical damage
  • Do not place the machine in direct sunlight or any other heat source
  • Keep away from any corrosive substances or gases
  • Avoid storing the machine in areas with low frequency vibration that may cause false brinelling of bearings
  • The ambient temperature and moisture should be moderate and kept as constant and smooth as possible