- Immediately remove all water and oil spills from the floor of machine vicinity and keep the floor dry to prevent accidents.
- Keep combustible materials away from the work area and any other place where there are hot chips.
- Always provide sufficient lighting in the work area.
- Always provide sufficient working space for maintenance work when installing the machine.
- Never place tools or other potentially dangerous object on top of the headstock, turret and covers.
- Protect all cables which are along the floor from being damaged by chips: damaged cables and wires will cause current leakage and short-circuit.
- Use strong service platforms only and make sure that nothing can slip off them.
- Make sure that the nominal cross-sectional area of the power supply cable between the factory power supply switch and the machine main power breaker is such as to enable a stable supply for operation at the maximum output.