29 Storage (Clone)

Fix all loose parts and have the machine treated with a rust inhibitor
Secure the machine firmly in the crate so that it cannot fall down
Make sure to cover the machine with a waterproof cover to protect it from moisture or corrosive substances. This protects the mechanical and electrical parts from damage
Add a moisture-inhibiting substance to the box
Do not place the entire packaging directly under sunlight or near any other heat source
Keep away from corrosive substances or devices that cause unusual vibrations
The ambient temperature and humidity should be moderate and kept as constant and even as possible

Fix all loose parts
Apply plenty of anti-corrosion agent to the exposed metal parts
Lower the spindle to its lower limit and place it on a suitable wooden block
Disconnect and remove the power cable
Secure all sliding guards and doors so that they cannot move
- Apply a moisture-repellent substance to the control cabinet, control panel and all other machine housings
Cover the machine with a suitable waterproof and dustproof film or cover. Moisture and dust can cause mechanical and electrical damage
Do not place the machine in direct sunlight or in any other heat source
Keep the machine away from corrosive substances or gases
Avoid storing the machine in areas with low-frequency vibrations, which can cause the bearings to start up incorrectly

The ambient temperature and humidity should be moderate and kept as constant and uniform as possible