11.1 End of Work
At the end of daily working cycle, switch off the main power and start a manual machine cleaning phase and after apply a thin layer of protective oil to axes guideways and chuck.
11.2 Electric Cabinet and Numerical Control (NC)
At the end of machine installation done by technicians of authorized service company, NC parameters must not be changed, and removal or modifications of safety device or part of electric cabinet are not allowed because all these things can generate dangerous machine malfunctions; machine manufacturer and mandatory will be not responsible for this.
If some parameter needs to be changed, please contact the authorized service company. Switch off the main machine power, and disconnect the power cable where possible. And perform test by using some instrument if effectively the power is off before doing checking or maintenance of the electric cabinet or of electric parts.
Whatever maintenance action, if not belong to those specified in the present manual, must be done by technicians of authorized service company.